Home Amplifiers Current-sense amplifiers Digital power monitors with integrated shunt resistor
Home
Amplifiers
Current-sense amplifiers
Digital power monitors with integrated shunt resistor
NEW

INA700

ACTIVE

40-V 16-Bit I²C output digital power monitor in WCSP with EZShunt™ Technology

Order now
Data sheet

INA700

ACTIVE
Data sheet Order now

Product details

Continuous current (max) (A) 15 Common-mode voltage (max) (V) 40 Common-mode voltage (min) (V) -0.1 Input offset current (±) (max) (mA) 2 Input offset current drift (±) (typ) (µA/°C) 50 Gain error (%) 0.25 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 1.1 Digital interface I2C Resolution (Bits) 16 Features Alert Function, Bidirectional, Digital Temp Monitor, Integrated Power Monitor, Integrated Shunt, Low-side Capable, Ultra precise Rating Catalog Operating temperature range (°C) -40 to 125
Continuous current (max) (A) 15 Common-mode voltage (max) (V) 40 Common-mode voltage (min) (V) -0.1 Input offset current (±) (max) (mA) 2 Input offset current drift (±) (typ) (µA/°C) 50 Gain error (%) 0.25 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 1.1 Digital interface I2C Resolution (Bits) 16 Features Alert Function, Bidirectional, Digital Temp Monitor, Integrated Power Monitor, Integrated Shunt, Low-side Capable, Ultra precise Rating Catalog Operating temperature range (°C) -40 to 125
POWERWCSP (YWF) 8 See data sheet
  • Low loss integrated shunt resistor
    • Internal resistance: 2 mΩ at T A = 25°C
    • Current rating: ±15 A at T A = 25°C
  • High-resolution, 16-bit delta-sigma ADC
    • Wide common-mode range: –0.3 V to +40 V
    • Reports current, bus voltage, power, internal temperature, energy, and charge
    • Programmable conversion time and averaging
  • Current monitoring accuracy:
    • Total Measurement Error: ±0.5% at 5 A
    • Offset current: ±1.5 mA (maximum)
    • Gain error: ±0.5% (maximum at 5 A)
    • Gain error drift: ±50 ppm/°C (maximum)
  • Power monitoring accuracy:
    • 0.85% accuracy at 5 A
  • Energy and Charge accuracy:
    • 1.35% accuracy at 5 A
  • Internal monitoring and fault detection
  • Precision oscillator: ±0.5% (maximum)
  • 2.94-MHz High-Speed I 2C interface with 4 pin-selectable addresses
  • Operates from a 2.7-V to 5.5-V supply
    • Operational current: 640 µA (typical)
    • Shutdown current: 5 µA (maximum)
  • Low loss integrated shunt resistor
    • Internal resistance: 2 mΩ at T A = 25°C
    • Current rating: ±15 A at T A = 25°C
  • High-resolution, 16-bit delta-sigma ADC
    • Wide common-mode range: –0.3 V to +40 V
    • Reports current, bus voltage, power, internal temperature, energy, and charge
    • Programmable conversion time and averaging
  • Current monitoring accuracy:
    • Total Measurement Error: ±0.5% at 5 A
    • Offset current: ±1.5 mA (maximum)
    • Gain error: ±0.5% (maximum at 5 A)
    • Gain error drift: ±50 ppm/°C (maximum)
  • Power monitoring accuracy:
    • 0.85% accuracy at 5 A
  • Energy and Charge accuracy:
    • 1.35% accuracy at 5 A
  • Internal monitoring and fault detection
  • Precision oscillator: ±0.5% (maximum)
  • 2.94-MHz High-Speed I 2C interface with 4 pin-selectable addresses
  • Operates from a 2.7-V to 5.5-V supply
    • Operational current: 640 µA (typical)
    • Shutdown current: 5 µA (maximum)

The INA700 is a digital power monitor with an integrated shunt resistor along with a 16-bit delta-sigma ADC specifically designed for current sensing applications. The device can measure full-scale currents up to ±15.728 A, over the common-mode voltage range of –0.3 V to +40 V.

The INA700 reports current, bus voltage, die temperature, power, energy and charge accumulation with a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±3°C accurate over the junction temperature range.

The low offset and gain error drift of the INA700 allows use in systems that do not undergo temperature calibration during manufacturing.

The device features selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data and allows for optimization of overcurrent detection windows.

The device is available in a tiny PowerWCSP (DSBGA) package to minimize the solution size and maximize thermal performance.

The INA700 is a digital power monitor with an integrated shunt resistor along with a 16-bit delta-sigma ADC specifically designed for current sensing applications. The device can measure full-scale currents up to ±15.728 A, over the common-mode voltage range of –0.3 V to +40 V.

The INA700 reports current, bus voltage, die temperature, power, energy and charge accumulation with a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±3°C accurate over the junction temperature range.

The low offset and gain error drift of the INA700 allows use in systems that do not undergo temperature calibration during manufacturing.

The device features selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data and allows for optimization of overcurrent detection windows.

The device is available in a tiny PowerWCSP (DSBGA) package to minimize the solution size and maximize thermal performance.
filter Find other Digital power monitors with integrated shunt resistor
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 8
Type Title Date
* Data sheet INA700 40 V, 16-Bit, I2C Output Digital Power Monitor in WCSP with 2 mΩ EZShunt Technology datasheet (Rev. A) PDF | HTML 14 Sep 2023
White paper Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A) PDF | HTML 30 Apr 2024
Technical article Bringing design simplicity, low drift, and small size to integrated-shunt solutions PDF | HTML 04 Jan 2024
Application brief Current Sensing Applications in Communication Infrastructure Equipment (Rev. C) PDF | HTML 08 Aug 2023
Application brief Improving Power Amplifier Efficiency With Current Monitors (Rev. B) PDF | HTML 24 Jul 2023
Product overview INA700 Product Overview PDF | HTML 23 May 2023
User guide INA700EVM User's Guide PDF | HTML 20 Apr 2023
Certificate INA700EVM EU RoHS Declaration of Conformity (DoC) 23 Mar 2023

Design & development

Please view the Design & development section on a desktop.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos