Home Amplifiers Operational amplifiers (op amps) Audio op amps
Home
Amplifiers
Operational amplifiers (op amps)
Audio op amps

OPA1637

ACTIVE

High-fidelity, high-voltage (36-V), low-noise (3.7-nV/rtHz) Burr-Brown™ audio fully-differential amp

Order now
Data sheet

OPA1637

ACTIVE
Data sheet Order now

Product details

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 9.2 Slew rate (typ) (V/µs) 15 Rail-to-rail No Vos (offset voltage at 25°C) (max) (mV) 0.2 Iq per channel (typ) (mA) 0.95 Vn at 1 kHz (typ) (nV√Hz) 3.7 Features Burr-Brown™ Audio, Premium Sound THD + N at 1 kHz (typ) (%) 0.0001 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.031 Product type Premier Architecture Bipolar CMRR (typ) (dB) 140 Input bias current (max) (pA) 2000
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 9.2 Slew rate (typ) (V/µs) 15 Rail-to-rail No Vos (offset voltage at 25°C) (max) (mV) 0.2 Iq per channel (typ) (mA) 0.95 Vn at 1 kHz (typ) (nV√Hz) 3.7 Features Burr-Brown™ Audio, Premium Sound THD + N at 1 kHz (typ) (%) 0.0001 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.031 Product type Premier Architecture Bipolar CMRR (typ) (dB) 140 Input bias current (max) (pA) 2000
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Low input voltage noise: 3.7 nV/√Hz at 1 kHz
  • Low THD + N: –120 dB at 1 kHz
  • Low supply current: 950 µA at ±18 V
  • Input offset voltage: ±200 µV (maximum)
  • Input bias current: 2 nA (maximum)
  • Low bias current noise: 400 fA/√Hz at 10 Hz
  • Gain-bandwidth product: 9.2 MHz
  • Differential output slew rate: 15 V/µs
  • Wide input and output common-mode range
  • Wide single-supply operating range: 3 V to 36 V
  • Low supply current power-down feature: < 20 µA
  • Overload power limit
  • Current limit
  • Package: 8-pin VSSOP
  • Temperature range: –40°C to +125°C
  • Low input voltage noise: 3.7 nV/√Hz at 1 kHz
  • Low THD + N: –120 dB at 1 kHz
  • Low supply current: 950 µA at ±18 V
  • Input offset voltage: ±200 µV (maximum)
  • Input bias current: 2 nA (maximum)
  • Low bias current noise: 400 fA/√Hz at 10 Hz
  • Gain-bandwidth product: 9.2 MHz
  • Differential output slew rate: 15 V/µs
  • Wide input and output common-mode range
  • Wide single-supply operating range: 3 V to 36 V
  • Low supply current power-down feature: < 20 µA
  • Overload power limit
  • Current limit
  • Package: 8-pin VSSOP
  • Temperature range: –40°C to +125°C

The OPA1637 is a low-noise, low total harmonic distortion (THD), fully differential, Burr-Brown™ Audio operational amplifier that easily filters and drives fully differential, audio signal chains.

The OPA1637 also converts single-ended sources to differential outputs required by high-fidelity analog-to-digital converters (ADCs). Designed for exceptional low noise and THD, the bipolar super-beta inputs yield a very low noise figure at very-low quiescent current and input bias current. This device is designed for audio circuits where low power consumption is required along with excellent signal-to-noise ratio (SNR) and spurious-free dynamic range (SFDR).

The OPA1637 features high-voltage supply capability, allowing for supply voltages up to ±18 V. This capability allows high-voltage differential signal chains to benefit from the improved headroom and dynamic range without adding separate amplifiers for each polarity of the differential signal. Very-low voltage and current noise enables the OPA1637 for use in high-gain configurations with minimal impact to the audio signal noise.

The OPA1637 is characterized for operation over the wide temperature range of –40°C to +125°C, and is available in an 8-pin VSSOP package.

The OPA1637 is a low-noise, low total harmonic distortion (THD), fully differential, Burr-Brown™ Audio operational amplifier that easily filters and drives fully differential, audio signal chains.

The OPA1637 also converts single-ended sources to differential outputs required by high-fidelity analog-to-digital converters (ADCs). Designed for exceptional low noise and THD, the bipolar super-beta inputs yield a very low noise figure at very-low quiescent current and input bias current. This device is designed for audio circuits where low power consumption is required along with excellent signal-to-noise ratio (SNR) and spurious-free dynamic range (SFDR).

The OPA1637 features high-voltage supply capability, allowing for supply voltages up to ±18 V. This capability allows high-voltage differential signal chains to benefit from the improved headroom and dynamic range without adding separate amplifiers for each polarity of the differential signal. Very-low voltage and current noise enables the OPA1637 for use in high-gain configurations with minimal impact to the audio signal noise.

The OPA1637 is characterized for operation over the wide temperature range of –40°C to +125°C, and is available in an 8-pin VSSOP package.
filter Find other Audio op amps
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
THP210 ACTIVE High precision (40-μV, 0.1μV/C), high-voltage (36-V), low-noise (3.7-nV/√Hz), fully-differential amp High-precision, high-voltage (40-µV, 0.35-µV/√Hz) fully differential amplifier

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet OPA1637 High-Fidelity, Low-Noise, Fully-Differential, Burr-Brown™ Audio Operational Amplifier datasheet (Rev. B) PDF | HTML 18 Aug 2020
White paper Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A) PDF | HTML 30 Apr 2024
Application brief Understanding Op Amp Noise in Audio Circuits PDF | HTML 14 Jun 2021
Application note Optimizing Noise and Power with Super Beta-Fully Differential Amplifiers PDF | HTML 07 Dec 2020
Certificate OPA1637EVM EU Declaration of Conformity (DoC) 25 Jun 2020
EVM User's guide OPA1637 Evaluation Module User's Guide (Rev. A) PDF | HTML 10 Jun 2020
Application note Compensate Transimpedance Amplifiers Intuitively (Rev. A) 30 Mar 2005

Design & development

Please view the Design & development section on a desktop.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos